Commercial Vehicle Products

Air Springs

From the minimum loads of an unhitched tractor to the weight of a fully-loaded trailer, commercial vehicle axles need to cover extreme load fluctuations with the rear axles being exposed to the main load of those fluctuations. With their ability to quickly change the spring rate according to the current load situation, commercial vehicle air springs are an excellent solution for this challenge. Therefore, they are used in most commercial vehicles like trucks and buses as well as in trailers.

Air Springs

A proven solution for every axle load in Commercial Vehicle applications

Dr. Joerg Boecking

PhD in mechanical engineering at the Technical University Darmstadt (Germany)

Master of Business Administration at the University of St. Gallen (Switzerland) and RWTH Aachen (Germany)

Former Positions (selection)

  • CTO of Freudenberg & Co. KG
  • General Manager at Freudenberg New Technologies
  • Head of Business Area Motor Mounts at Vibracoustic GmbH
  • Director System Development and Technologies at Vibracoustic GmbH

Marco Altherr  |  CFO

Diplom-Kaufmann at the University of Lahr (Germany)

Former Positions (selection)

  • Head of Corporate Controlling and Accounting at Freudenberg & Co. KG
  • Head of Corporate Audit at Freudenberg & Co. KG
  • Head of Treasury at manroland
  • Head of Group Consolidation and Head of Financial Controlling at Heidelberger Druckmaschinen AG
  • Consultant at Arthur Andersen

Frank Mueller  |  CEO

Bachelor of Business Administration at ESB Business School, Reutlingen (Germany) and Middlesex University, London (United Kingdom)

Former Positions (selection)

  • Vice President and General Manager Occupant Safety Systems TRW Inc.
  • CEO of Behr America Inc.
  • CFO of Behr America Inc.
  • Consultant at Roland Berger Strategy Consultants GmbH

Dr. Jörg Böcking

Promotion am Fachbereich Maschinenbau an der Technischen Universität Darmstadt (Deutschland)

Master of Business Administration an der Universität St. Gallen (Schweiz) und der RWTH Aachen (Deutschland)

Vorherige Positionen (Auswahl)

  • CTO bei Freudenberg & Co. KG
  • Geschäftsführer bei Freudenberg New Technologies
  • Leiter des Geschäftsbereichs Motorlager bei der Vibracoustic GmbH
  • Leiter Systementwicklung und Technologien bei der Vibracoustic GmbH

Marco Altherr  |  CFO

Diplom-Kaufmann an der Universität Lahr (Deutschland)

Vorherige Positionen (Auswahl)

  • Head of Corporate Controlling and Accounting bei Freudenberg & Co. KG
  • Head of Corporate Audit bei Freudenberg & Co. KG
  • Head of Treasury bei manroland
  • Head of Group Consolidation and Head of Financial Controlling bei Heidelberger Druckmaschinen AG
  • Berater bei Arthur Andersen

Frank Müller  |  Vorstandsvorsitzender

Bachelor of Business Administration an der ESB Business School, Reutlingen (Deutschland) und der Middlesex University, London (Großbritannien)

Vorherige Positionen (Auswahl)

  • Vice President und General Manager Occupant Safety Systems bei TRW Inc.
  • CEO von Behr America Inc.
  • CFO von Behr America Inc.
  • Berater bei Roland Berger Strategy Consultants GmbH

Axel Wersel | COO

Dipl.-Wirt.-Ing. and Dipl.-Automotive Engineer from Fachhochschule Wedel (Germany) and Hochschule für Angewandte Wissenschaften, Hamburg (Germany)

Former Positions (selection)

  • Executive Vice President Business Unit RIDE Solutions, Vibracoustic AG
  • Business Area Manager Chassis, Vibracoustic GmbH & Co KG
  • Head of Process Engineering,Phoenix AG
  • Project Manager, Phoenix AG

Axel Wersel | COO

Dipl.-Wirt.-Ing. und Dipl.-Fahrzeugbauer der Fachhochschule Wedel (Deutschland) und Hochschule für Angewandte Wissenschaften, Hamburg (Deutschland)

Vorherige Positionen (Auswahl)

  • Executive Vice President Business Unit RIDE Solutions, Vibracoustic AG
  • Geschäftsbereichsleiter Fahrwerklager, Vibracoustic GmbH & Co KG
  • Leiter Verfahrenstechnik, Phoenix AG
  • Projektmanager, Phoenix AG